Safety Relief Valves: Sizing and Selection

When looking to source a safety relief valve, you'll need to gather and provide the following information, which will help safety valves online provide an accurate and appropriate quotation:

Valve Type

Specify the type of safety relief valve you need, such as safety valve or relief valve. As each type has its own unique characteristics and applications.

Valve Size

Indicate the required valve size, typically in terms of the valve's inlet and outlet diameter.

Set Pressure

Provide the desired set pressure or pressure relief set point at which the valve should open and begin relieving pressure.

Flow Capacity

Specify the required flow capacity or relieving capacity in terms of pounds per hour, gallons per minute, or other relevant units.

Fluid and Service Conditions

Describe the type of fluid the valve will handle (e.g., steam, gas, liquid) and the specific service conditions, including temperature and pressure ranges.

Material of Construction

Indicate the materials you prefer for the valve body, trim, and seals. Material selection should be compatible with the fluid and environmental conditions.

Code and Standards

Identify any industry-specific codes and standards that may be applicable to the valve, such as ASME, API, or ISO standards.

By providing this information, you'll receive an accurate and relevant quotation for the safety relief valve you require, also ensuring that the selected valve meets your operational and safety requirements.

If you have a safety valve enquiry then contact Safety Valves Online on +44 (0)1482 601030 or email sales@safetyvalvesonline.com.